installation guide

DYNATRON CORPORATION PAGE - 1


1. Purpose: The installation procedure for the Water Cooler T81 designed for CPU of Intel Socket 478 2. Parts List: (see right figure) 01 - Water Cooler System
02 - One Backplate 03 - One Bag of Screws 3. Tool Required: Mid-size Phillips Screwdriver

4. Installation Steps: ( Caution: Please Read Warning Notice As Labeled On Pkg. Box Lid Before Installing ! ) Step01- Flip your computer Motherboard alone on working bench, attach the
Backplate and square it to the CPU mounting holes, and then flip back the
Motherboard and have your CPU ready for installing. (note: square the
Backplate with its grid side toward Motherboard, see right figure)
Step02- Remove protective pad (black) from Coldplate (note: do not touch pre-screened grease, and follow
Warning Notice for hands cleaning, (see right figure). Place ColdPlate on
top of CPU along with Cooler Radiator orients to the nearest chassis
ventilation area. CPU WATER COOLER INSTALLATION GUIDE Model Number: T81 0 1 0 3 02 01 03 DYNATRON CORPORATION PAGE - 2 Be aware of the desired placement of your computer (desktop) along with Water Cooler. Newly installed Water Pump shall NOT in opposite position (see
below left ), or perpendicular (up side down) to the floor with “Flow Window”
facing downward (see below right).


Step03- Note: every M3 screw set should insert spring, and then follow by flat washer (see figure below left). Mount screw set by using screwdriver,
and gently pressing screw set downward in order to lock with the Backplate, and then tighten each screw with diagonal direction.
(see figure below right). FLOW
WINDOW Wrong Position Wrong Position DYNATRON CORPORATION PAGE - 3



Step04- Position and secure the Radiator with screws to the nearest
ventilation area on computer chassis. (note: soothe the water
tube to avoid loop bending when fixing Radiator to chassis, see right
figure)
Step05- Connect wire housings of Water Pump (4pin) and Cooling Fan (3pin) to designated Motherboard power wafer to complete T81 Water Cooler installation procedure. (see figures below)




Congratulations ! You Have Successfully Completed The Installation.
Enjoy The Powerful Cooling Experience !

Connector for Water Pump Connector for Fan DYNATRON CORPORATION PAGE - 4




Company Information: Dynatron Corporation URL: www.dynatron-corp.com Sales: sales@dynatron-corp.com
Technical: tech@dynatron-corp.com RMA: rma@dynatron-corp.com
Tel: 510-498-8888 Fax: 510-498-8488
Document Number: CL-INS-T81_R1.0
Last Updated: January 26, 2005

Comments